What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

What is lightning?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

[old diagram got deleted by accident]

How does one succeed in life?

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

HSBC’s Mark Tucker to return to insurer AIA as chair - Financial Times

He then describes Rainy Season and Lightning.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Do interviewers discriminate against a candidate if he or she is overweight (assuming physical fitness is NOT part of the job requirements)?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

He then describes the function of a fuse.

A fuse is a non-resetable over current circuit protector.

AMC Theaters to Run Even More Commercials Before Movies Play - Bloomberg.com

But… the neutral is now “floating” because of the 1 ohm resistance.

What does a fuse do?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Fifth measles case in Georgia confirmed in family member of person with earlier case - 11Alive.com

The bolt then partially travels down the line to your home.

the problem then depends on "how fast does the fuse operate?".

These devices are installed between the “hot” and “neutral” and protective ground.

HIV Drugs Linked to Lower Alzheimer’s Risk - Neuroscience News

I post the exact comment here.

The other is “what does a “fuse” do?”

Now when you have a certain ac resistance, then a current flows in a loop.

Smoking Rates by Country and Gender in 2025 - Visual Capitalist

Barnstars:

This is where the MOV conducts again, and dissipated the energy.

At least they know the answer if they wanted it.

Chinese-Owned Company Halts Work on Factory to Make Batteries in U.S. - WSJ

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

These are simplified answers to the original question, and does not change anything I wrote above.

The third is lightning and “how it gets conducted into a home.”

What are some common historical misconceptions?

He then asserts :

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

An AC voltage/ current source, and an ac inductive load.

TSA issues warning as they ban certain card at airport security that's owned by millions - UNILAD

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

There are two important concepts here.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

There are three different concepts here that are getting confused.

Here is a simplified AC power diagram.

Upvotes:

nine

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

In schematic diagrams this is the symbol for a fuse:

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

eight

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

First Sentence:

Can the fuse protect the electronic devices from lightning instead of a surge protector.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

2024–10–16 [ OO OLAOYE OYEBODE ]

One

But it can get overloaded, and no longer works.

but I think this circuit , shows a few more pieces.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

One is “what exactly is in a ‘surge protector’ ? ”

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

At one ohm, the resistor has a maximum of 1 watt power.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

so, what happens?

A circuit breaker is similar, but is resettable.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This device then solves the entire problem.

2024–10–10[John johnson John Johnson ]

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This is where this question deviates from being a 'generic' question, and becomes more specific.

2024–10–14 [Omar Gharbi Omar Gharbi ]

This is 'the assistant's answer'

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Because the load is inductive, the current lags the voltage.(by a bit).

This one hit behind the barn.

It seems Mohan does not understand the difference between a comment and an Answer.

For this case there are devices called Metal oxide varistors (MOV).

The MOV will conduct when the voltage exceeds 50% of line voltage.

It also is a device that limits the change in current flow.

So, the voltage could go up to 500 volts, and the fuse will not open up.

[image of Common-mode choke]

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Edit 2024–10.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

what exactly is a ‘surge’ protector?

but this device (an Inductor) … impedes the rapid changes in the current.

(Dc diagram shown, AC is similar).

a photo is worth a thousand words.